I made a network in Cisco Packet Tracer, in the network there are two computers, one switch and a dhcp server.

I am building this topology here my PC here should receive ip from central router via DHCP. My PC is on vlan10 and port between switch and office router is trunked on vlan10. DHCP pool is created on central router. office router port fa0/0.10 is on ip 192.168.1.1 and I have configured ip-helper for this port to be 10.0.0.2. But my PC still doesn’t get the ip from central server

I am building this topology here my PC here should receive ip from central router via DHCP. My PC is on vlan10 and port between switch and office router is trunked on vlan10. DHCP pool is created on central router. office router port fa0/0.10 is on ip 192.168.1.1 and I have configured ip-helper for this port to be 10.0.0.2. But my PC still doesn’t get the ip from central server

I am trying to set up a network topology in Cisco Packet Tracer, but I’m experiencing issues with VLAN trunking and connectivity between core and distribution switches. Here are the details of my setup and the steps I’ve taken so far:

I am not able to deny printer access to a user. USER IP: 192.168.10.3 PRINTER IP: 192.168.20.5 I wrote this ACL: Extended IP access list 103 10 deny ip host 192.168.10.3 host 192.168.20.5 20 permit ip any any (8 match(es)) Applied this on the interface of the user connected to the router in the outbound […]