Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.
Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.
Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.
Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.
Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.
Incoming BLE L2CAP SDU not reported to Delegate
I have an application, running on MacOs, that communicates with a Bluetooth LE peripheral. I’m able to establish a L2CAP channel and after the channel is established, the peripheral sends a first (quite small) SDU on that channel to the application. The PSM is 0x80 and was chosen by the peripherals BLE stack. The application receives the PSM via GATT.