Reference: What is variable scope, which variables are accessible from where and what are “undefined variable” errors?

Note: This is a reference question for dealing with variable scope in PHP. Please close any of the many questions fitting this pattern as a duplicate of this one.

What is “variable scope” in PHP? Are variables from one .php file accessible in another? Why do I sometimes get “undefined variable” errors?

What is “variable scope”?

Variables have a limited “scope”, or “places from which they are accessible”. Just because you wrote $foo = 'bar'; once somewhere in your application doesn’t mean you can refer to $foo from everywhere else inside the application. The variable $foo has a certain scope within which it is valid and only code in the same scope has access to the variable.

How is a scope defined in PHP?

Very simple: PHP has function scope. That’s the only kind of scope separator that exists in PHP. Variables inside a function are only available inside that function. Variables outside of functions are available anywhere outside of functions, but not inside any function. This means there’s one special scope in PHP: the global scope. Any variable declared outside of any function is within this global scope.

Example:

<?php

$foo = 'bar';

function myFunc() {
    $baz = 42;
}

$foo is in the global scope, $baz is in a local scope inside myFunc. Only code inside myFunc has access to $baz. Only code outside myFunc has access to $foo. Neither has access to the other:

<?php

$foo = 'bar';

function myFunc() {
    $baz = 42;

    echo $foo;  // doesn't work
    echo $baz;  // works
}

echo $foo;  // works
echo $baz;  // doesn't work

Scope and included files

File boundaries do not separate scope:

a.php

<?php

$foo = 'bar';

b.php

<?php

include 'a.php';

echo $foo;  // works!

The same rules apply to included code as applies to any other code: only functions separate scope. For the purpose of scope, you may think of including files like copy and pasting code:

c.php

<?php

function myFunc() {
    include 'a.php';

    echo $foo;  // works
}

myFunc();

echo $foo;  // doesn't work!

In the above example, a.php was included inside myFunc, any variables inside a.php only have local function scope. Just because they appear to be in the global scope in a.php doesn’t necessarily mean they are, it actually depends on which context that code is included/executed in.

What about functions inside functions and classes?

Every new function declaration introduces a new scope, it’s that simple.

(anonymous) functions inside functions

function foo() {
    $foo = 'bar';

    $bar = function () {
        // no access to $foo
        $baz = 'baz';
    };

    // no access to $baz
}

classes

$foo = 'foo';

class Bar {

    public function baz() {
        // no access to $foo
        $baz = 'baz';
    }

}

// no access to $baz

What is scope good for?

Dealing with scoping issues may seem annoying, but limited variable scope is essential to writing complex applications! If every variable you declare would be available from everywhere else inside your application, you’d be stepping all over your variables with no real way to track what changes what. There are only so many sensible names you can give to your variables, you probably want to use the variable “$name” in more than one place. If you could only have this unique variable name once in your app, you’d have to resort to really complicated naming schemes to make sure your variables are unique and that you’re not changing the wrong variable from the wrong piece of code.

Observe:

function foo() {
    echo $bar;
}

If there was no scope, what would the above function do? Where does $bar come from? What state does it have? Is it even initialized? Do you have to check every time? This is not maintainable. Which brings us to…

Crossing scope boundaries

The right way: passing variables in and out

function foo($bar) {
    echo $bar;
    return 42;
}

The variable $bar is explicitly coming into this scope as function argument. Just looking at this function it’s clear where the values it works with originate from. It then explicitly returns a value. The caller has the confidence to know what variables the function will work with and where its return values come from:

$baz   = 'baz';
$blarg = foo($baz);

Extending the scope of variables into anonymous functions

$foo = 'bar';

$baz = function () use ($foo) {
    echo $foo;
};

$baz();

The anonymous function explicitly includes $foo from its surrounding scope. Note that this is not the same as global scope.

The wrong way: `global`

As said before, the global scope is somewhat special, and functions can explicitly import variables from it:

$foo = 'bar';

function baz() {
    global $foo;
    echo $foo;
    $foo = 'baz';
}

This function uses and modifies the global variable $foo. Do not do this! _{(Unless you really really really really know what you’re doing, and even then: don’t!)}

All the caller of this function sees is this:

baz(); // outputs "bar"
unset($foo);
baz(); // no output, WTF?!
baz(); // outputs "baz", WTF?!?!!

There’s no indication that this function has any side effects, yet it does. This very easily becomes a tangled mess as some functions keep modifying and requiring some global state. You want functions to be stateless, acting only on their inputs and returning defined output, however many times you call them.

You should avoid using the global scope in any way as much as possible; most certainly you should not be “pulling” variables out of the global scope into a local scope.

Although variables defined inside of a function’s scope can not be accessed from the outside that does not mean you can not use their values after that function completes. PHP has a well known static keyword that is widely used in object-oriented PHP for defining static methods and properties but one should keep in mind that static may also be used inside functions to define static variables.

What is it ‘static variable’?

Static variable differs from ordinary variable defined in function’s scope in case that it does not loose value when program execution leaves this scope. Let’s consider the following example of using static variables:

function countSheep($num) {
 static $counter = 0;
 $counter += $num;
 echo "$counter sheep jumped over fence";
}

countSheep(1);
countSheep(2);
countSheep(3);

Result:

1 sheep jumped over fence
3 sheep jumped over fence
6 sheep jumped over fence

If we’d defined $counter without static then each time echoed value would be the same as $num parameter passed to the function. Using static allows to build this simple counter without additional workaround.

Static variables use-cases

To store values between consequent calls to function.
To store values between recursive calls when there is no way (or no
purpose) to pass them as params.
To cache value which is normally better to retrieve once. For
example, result of reading immutable file on server.

Tricks

Static variable exists only in a local function scope. It can not be
accessed outside of the function it has been defined in. So you may
be sure that it will keep its value unchanged until the next call to
that function.

Static variable may only be defined as a scalar or as a scalar
expression (since PHP 5.6). Assigning other values to it inevitably
leads to a failure at least at the moment this article was written.
Nevertheless you are able to do so just on the next line of your code:

function countSheep($num) {
  static $counter = 0;
  $counter += sqrt($num);//imagine we need to take root of our sheep each time
  echo "$counter sheep jumped over fence";
}

Result:

2 sheep jumped over fence
5 sheep jumped over fence
9 sheep jumped over fence

Static function is kinda ‘shared’ between methods of objects of the
same class. It is easy to understand by viewing the following example:

class SomeClass {
  public function foo() {
    static $x = 0;
    echo ++$x;
  }
}

$object1 = new SomeClass;
$object2 = new SomeClass;

$object1->foo(); // 1
$object2->foo(); // 2 oops, $object2 uses the same static $x as $object1
$object1->foo(); // 3 now $object1 increments $x
$object2->foo(); // 4 and now his twin brother

This only works with objects of the same class. If objects are from different classes (even extending one another) behavior of static vars will be as expected.

Is static variable the only way to keep values between calls to a function?

Another way to keep values between function calls is to use closures. Closures were introduced in PHP 5.3. In two words they allow you to limit access to some set of variables within a function scope to another anonymous function that will be the only way to access them. Being in closure variables may imitate (more or less successfully) OOP concepts like ‘class constants’ (if they were passed in closure by value) or ‘private properties’ (if passed by reference) in structured programming.

The latter actually allows to use closures instead of static variables. What to use is always up to developer to decide but it should be mentioned that static variables are definitely useful when working with recursions and deserve to be noticed by devs.

I won’t post a complete answer to the question, as the existing ones and the PHP manual do a great job of explaining most of this.

But one subject that was missed was that of superglobals, including the commonly used $_POST, $_GET, $_SESSION, etc. These variables are arrays that are always available, in any scope, without a global declaration.

For example, this function will print out the name of the user running the PHP script. The variable is available to the function without any problem.

<?php
function test() {
    echo $_ENV["user"];
}

The general rule of “globals are bad” is typically amended in PHP to “globals are bad but superglobals are alright,” as long as one is not misusing them. (All these variables are writable, so they could be used to avoid dependency injection if you were really terrible.)

These variables are not guaranteed to be present; an administrator can disable some or all of them using the variables_order directive in php.ini, but this is not common behaviour.

A list of current superglobals:

$GLOBALS – All the global variables in the current script
$_SERVER – Information on the server and execution environment
$_GET – Values passed in the query string of the URL, regardless of the HTTP method used for the request
$_POST – Values passed in an HTTP POST request with application/x-www-form-urlencoded or multipart/form-data MIME types
$_FILES – Files passed in an HTTP POST request with a multipart/form-data MIME type
$_COOKIE – Cookies passed with the current request
$_SESSION – Session variables stored internally by PHP
$_REQUEST – Typically a combination of $_GET and $_POST, but sometimes $_COOKIES. The content is determined by the request_order directive in php.ini.
$_ENV – The environment variables of the current script

Filed under: Kiến thức lập trình - @ 14:45

Thẻ: phpscope

Thiết kế website giá rẻ

Danh mục

Reference: What is variable scope, which variables are accessible from where and what are “undefined variable” errors?

What is “variable scope”?

How is a scope defined in PHP?

Example:

Scope and included files

What about functions inside functions and classes?

(anonymous) functions inside functions

classes

What is scope good for?

Crossing scope boundaries

The right way: passing variables in and out

Extending the scope of variables into anonymous functions

The wrong way: `global`

What is it ‘static variable’?

Static variables use-cases

Tricks

Is static variable the only way to keep values between calls to a function?

Danh mục

What is “variable scope”?

How is a scope defined in PHP?

Example:

Scope and included files

What about functions inside functions and classes?

(anonymous) functions inside functions

classes

What is scope good for?

Crossing scope boundaries

The right way: passing variables in and out

Extending the scope of variables into anonymous functions

The wrong way: global

What is it ‘static variable’?

Static variables use-cases

Tricks

Is static variable the only way to keep values between calls to a function?

The wrong way: `global`