“error: Unable to find file or target named” when using BCP to change Boost namespace

I have a clean Boost Git clone with tag boost-1.87.0 checked out and all submodules recursively cloned. If I call bootstrap.sh and then b2 according to various getting started guides and best practive documents, I have no problem bootstrapping and then building Boost. Everything works fine.

For whatever it’s worth (but I don’t believe it’s my problem), I’m on macOS 15 with Clang 16, and these are my b2 arguments except where/as otherwise noted:

  -sBOOST_ROOT={dir}/_src 
  --boost-build=tools/build/src 
  cxxstd=20 
  -d 
  2 
  -j 
  2 
  -q 
  --prefix={dir} 
  --build-dir={dir}/shobj 
  --stagedir={dir}/stage 
  --user-config={dir}/user-config.jam 
  --layout=system 
  toolset=clang-darwin 
  threading=multi 
  link=shared 
  architecture=arm 
  instruction-set=nocona 
  address-model=64 
  --without-python 
  --disable-icu 
  variant=debug

But merely building stock Boost is not sufficient in my case, and for reasons over which I have no control and must abide by, I need to customize the Boost namespace using bcp.

So here’s what I’m doing:

Writing {dir}/user-config.jam:

constant BOOST_VERSION : mybranchname-1.87.0.a ;
constant MY_PLATFORM : macos15-clang16-arm-d ;
constant MY_LABEL : MYextralLabel ;
constant BOOST_USER_CONFIG : <my_boost/config/user.hpp> ;
using clang : 16 : clang++ : <cxxflags>-fvisibility=hidden <cxxflags>-fvisibility-inlines-hidden ;

The middle three lines are unique to my BCP attempt; the first and last lines I have successfully used when building non-BCP’d Boost.

Running {dir}/_src/boostrap.sh with a CWD of {dir}/_src (SUCCESS).
Running b2 with the above args, except variant=release instead of variant=debug, plus --prefix={dir}/bcp --build-dir={dir}/bcp --stagedir={dir}/bcp/stage tools/bcp with a CWD of {dir}/_src (SUCCESS).
Running {dir}/shobj/bin/bcp --namespace=boost_MYextralLabel --namespace-alias Jamroot boost boost-build.jam boostcpp.jam bootstrap.bat bootstrap.sh build status tools [insert_name_of_every_dir_in_libs] {dir}/_dst with a CWD of {dir}/_src, which copies/transmogrifies the contents of {dir}/_src into {dir}/_dst (SUCCESS).
Running {dir}/_dst/boostrap.sh with a CWD of {dir}/_dst (SUCCESS).
Running b2 with the above args, except _src replaced with _dst, with a CWD of {dir}/_dst to build the namespace-altered Boost (ERROR).

And here’s where I get an error:

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : yes [2]
    - cxx11_decltype           : yes [2]
    - cxx11_defaulted_functions : yes [2]
    - cxx11_defaulted_moves    : yes [2]
    - cxx11_hdr_functional     : yes [2]
    - cxx11_hdr_type_traits    : yes [2]
    - cxx11_noexcept           : yes [2]
    - cxx11_nullptr            : yes [2]
    - cxx11_override           : yes [2]
    - cxx11_range_based_for    : yes [2]
    - cxx11_rvalue_references  : yes [2]
    - cxx11_scoped_enums       : yes [2]
    - cxx11_smart_ptr          : yes [2]
    - cxx11_static_assert      : yes [2]
    - cxx11_variadic_templates : yes [2]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : yes [2]
error: Unable to find file or target named
error:     '/boost/align//boost_align'
error: referred to from project at
error:     '{dir}/_dst/libs/atomic/build'
make: *** [build] Error 1

I’ve tried dozens of different things over the past two workdays and always get the exact same result. The only thing I’ve done that has caused any different (but still erroneous output) is, between steps 4 (running bcp) and 5 (the second bootstrap, in the new directory), “cleaning” the generated files by deleting the directory {dir}/_dst/boost. If I insert that step between 4 and 5, the erroneous output of step 6 is now (after getting a little further):

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : no [2]
    - icu                      : no [3]
    - iconv (libc)             : no [3]
    - iconv (separate)         : yes [3]
    - cxx11_auto_declarations  : no [3]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : no [2]
    - cxx11_static_assert      : no [2]
    - cxx11_static_assert      : no [3]
    - has std::atomic_ref      : no [2]
    - has -Wl,--no-undefined   : no [2]
    - has -Wl,-undefined,error : yes [2]
    - has statx                : no [2]
    - has statx syscall        : no [2]
    - cxx11_rvalue_references  : no [2]
    - has std::atomic_ref      : no [3]
    - has -Wl,--no-undefined   : no [3]
    - has -Wl,-undefined,error : yes [3]
    - has statx                : no [3]
    - has statx syscall        : no [3]
    - cxx11_rvalue_references  : no [3]
    - has_icu builds           : no [2]
    - lockfree boost::atomic_flag : no [2]
    - native atomic int32 supported : no [3]
    - native syslog supported  : yes [3]
    - pthread supports robust mutexes : no [3]
    - cxx11_lambdas            : no [2]
    - cxx11_lambdas            : no [3]
    - std_wstreambuf builds    : no [2]
    - std_wstreambuf           : no [2]
    - std_wstreambuf           : no [3]
    - BOOST_COMP_GNUC >= 4.3.0 : no [2]
    - BOOST_COMP_GNUC >= 4.3.0 : no [4]
error: Unable to find file or target named
error:     'libs/thread/build//boost_MYextralLabel_thread'
error: referred to from project at
error:     '.'
make: *** [build] Error 1

I’m sure I’m doing something wrong, but after more than 12 hours of working on this I’ve run out of ideas and started to suspect that bcp is broken.

Any ideas?

Filed under: Kiến thức lập trình - @ 11:08

Thẻ: boostbcpboost-build

“error: Unable to find file or target named” when using BCP to change Boost namespace

For whatever it’s worth (but I don’t believe it’s my problem), I’m on macOS 15 with Clang 16, and these are my b2 arguments except where/as otherwise noted:

  -sBOOST_ROOT={dir}/_src 
  --boost-build=tools/build/src 
  cxxstd=20 
  -d 
  2 
  -j 
  2 
  -q 
  --prefix={dir} 
  --build-dir={dir}/shobj 
  --stagedir={dir}/stage 
  --user-config={dir}/user-config.jam 
  --layout=system 
  toolset=clang-darwin 
  threading=multi 
  link=shared 
  architecture=arm 
  instruction-set=nocona 
  address-model=64 
  --without-python 
  --disable-icu 
  variant=debug

But merely building stock Boost is not sufficient in my case, and for reasons over which I have no control and must abide by, I need to customize the Boost namespace using bcp.

So here’s what I’m doing:

Writing {dir}/user-config.jam:

constant BOOST_VERSION : mybranchname-1.87.0.a ;
constant MY_PLATFORM : macos15-clang16-arm-d ;
constant MY_LABEL : MYextralLabel ;
constant BOOST_USER_CONFIG : <my_boost/config/user.hpp> ;
using clang : 16 : clang++ : <cxxflags>-fvisibility=hidden <cxxflags>-fvisibility-inlines-hidden ;

The middle three lines are unique to my BCP attempt; the first and last lines I have successfully used when building non-BCP’d Boost.

Running {dir}/_src/boostrap.sh with a CWD of {dir}/_src (SUCCESS).
Running b2 with the above args, except variant=release instead of variant=debug, plus --prefix={dir}/bcp --build-dir={dir}/bcp --stagedir={dir}/bcp/stage tools/bcp with a CWD of {dir}/_src (SUCCESS).
Running {dir}/shobj/bin/bcp --namespace=boost_MYextralLabel --namespace-alias Jamroot boost boost-build.jam boostcpp.jam bootstrap.bat bootstrap.sh build status tools [insert_name_of_every_dir_in_libs] {dir}/_dst with a CWD of {dir}/_src, which copies/transmogrifies the contents of {dir}/_src into {dir}/_dst (SUCCESS).
Running {dir}/_dst/boostrap.sh with a CWD of {dir}/_dst (SUCCESS).
Running b2 with the above args, except _src replaced with _dst, with a CWD of {dir}/_dst to build the namespace-altered Boost (ERROR).

And here’s where I get an error:

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : yes [2]
    - cxx11_decltype           : yes [2]
    - cxx11_defaulted_functions : yes [2]
    - cxx11_defaulted_moves    : yes [2]
    - cxx11_hdr_functional     : yes [2]
    - cxx11_hdr_type_traits    : yes [2]
    - cxx11_noexcept           : yes [2]
    - cxx11_nullptr            : yes [2]
    - cxx11_override           : yes [2]
    - cxx11_range_based_for    : yes [2]
    - cxx11_rvalue_references  : yes [2]
    - cxx11_scoped_enums       : yes [2]
    - cxx11_smart_ptr          : yes [2]
    - cxx11_static_assert      : yes [2]
    - cxx11_variadic_templates : yes [2]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : yes [2]
error: Unable to find file or target named
error:     '/boost/align//boost_align'
error: referred to from project at
error:     '{dir}/_dst/libs/atomic/build'
make: *** [build] Error 1

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : no [2]
    - icu                      : no [3]
    - iconv (libc)             : no [3]
    - iconv (separate)         : yes [3]
    - cxx11_auto_declarations  : no [3]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : no [2]
    - cxx11_static_assert      : no [2]
    - cxx11_static_assert      : no [3]
    - has std::atomic_ref      : no [2]
    - has -Wl,--no-undefined   : no [2]
    - has -Wl,-undefined,error : yes [2]
    - has statx                : no [2]
    - has statx syscall        : no [2]
    - cxx11_rvalue_references  : no [2]
    - has std::atomic_ref      : no [3]
    - has -Wl,--no-undefined   : no [3]
    - has -Wl,-undefined,error : yes [3]
    - has statx                : no [3]
    - has statx syscall        : no [3]
    - cxx11_rvalue_references  : no [3]
    - has_icu builds           : no [2]
    - lockfree boost::atomic_flag : no [2]
    - native atomic int32 supported : no [3]
    - native syslog supported  : yes [3]
    - pthread supports robust mutexes : no [3]
    - cxx11_lambdas            : no [2]
    - cxx11_lambdas            : no [3]
    - std_wstreambuf builds    : no [2]
    - std_wstreambuf           : no [2]
    - std_wstreambuf           : no [3]
    - BOOST_COMP_GNUC >= 4.3.0 : no [2]
    - BOOST_COMP_GNUC >= 4.3.0 : no [4]
error: Unable to find file or target named
error:     'libs/thread/build//boost_MYextralLabel_thread'
error: referred to from project at
error:     '.'
make: *** [build] Error 1

I’m sure I’m doing something wrong, but after more than 12 hours of working on this I’ve run out of ideas and started to suspect that bcp is broken.

Any ideas?

Filed under: Kiến thức lập trình - @ 11:08

Thẻ: boostbcpboost-build

“error: Unable to find file or target named” when using BCP to change Boost namespace

For whatever it’s worth (but I don’t believe it’s my problem), I’m on macOS 15 with Clang 16, and these are my b2 arguments except where/as otherwise noted:

  -sBOOST_ROOT={dir}/_src 
  --boost-build=tools/build/src 
  cxxstd=20 
  -d 
  2 
  -j 
  2 
  -q 
  --prefix={dir} 
  --build-dir={dir}/shobj 
  --stagedir={dir}/stage 
  --user-config={dir}/user-config.jam 
  --layout=system 
  toolset=clang-darwin 
  threading=multi 
  link=shared 
  architecture=arm 
  instruction-set=nocona 
  address-model=64 
  --without-python 
  --disable-icu 
  variant=debug

But merely building stock Boost is not sufficient in my case, and for reasons over which I have no control and must abide by, I need to customize the Boost namespace using bcp.

So here’s what I’m doing:

Writing {dir}/user-config.jam:

constant BOOST_VERSION : mybranchname-1.87.0.a ;
constant MY_PLATFORM : macos15-clang16-arm-d ;
constant MY_LABEL : MYextralLabel ;
constant BOOST_USER_CONFIG : <my_boost/config/user.hpp> ;
using clang : 16 : clang++ : <cxxflags>-fvisibility=hidden <cxxflags>-fvisibility-inlines-hidden ;

The middle three lines are unique to my BCP attempt; the first and last lines I have successfully used when building non-BCP’d Boost.

Running {dir}/_src/boostrap.sh with a CWD of {dir}/_src (SUCCESS).
Running b2 with the above args, except variant=release instead of variant=debug, plus --prefix={dir}/bcp --build-dir={dir}/bcp --stagedir={dir}/bcp/stage tools/bcp with a CWD of {dir}/_src (SUCCESS).
Running {dir}/shobj/bin/bcp --namespace=boost_MYextralLabel --namespace-alias Jamroot boost boost-build.jam boostcpp.jam bootstrap.bat bootstrap.sh build status tools [insert_name_of_every_dir_in_libs] {dir}/_dst with a CWD of {dir}/_src, which copies/transmogrifies the contents of {dir}/_src into {dir}/_dst (SUCCESS).
Running {dir}/_dst/boostrap.sh with a CWD of {dir}/_dst (SUCCESS).
Running b2 with the above args, except _src replaced with _dst, with a CWD of {dir}/_dst to build the namespace-altered Boost (ERROR).

And here’s where I get an error:

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : yes [2]
    - cxx11_decltype           : yes [2]
    - cxx11_defaulted_functions : yes [2]
    - cxx11_defaulted_moves    : yes [2]
    - cxx11_hdr_functional     : yes [2]
    - cxx11_hdr_type_traits    : yes [2]
    - cxx11_noexcept           : yes [2]
    - cxx11_nullptr            : yes [2]
    - cxx11_override           : yes [2]
    - cxx11_range_based_for    : yes [2]
    - cxx11_rvalue_references  : yes [2]
    - cxx11_scoped_enums       : yes [2]
    - cxx11_smart_ptr          : yes [2]
    - cxx11_static_assert      : yes [2]
    - cxx11_variadic_templates : yes [2]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : yes [2]
error: Unable to find file or target named
error:     '/boost/align//boost_align'
error: referred to from project at
error:     '{dir}/_dst/libs/atomic/build'
make: *** [build] Error 1

Performing configuration checks

    - default address-model    : 64-bit [1]
    - default architecture     : arm [1]

Building the Boost C++ Libraries.


    - symlinks supported       : yes
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam.
note: to suppress this message, pass "--without-graph_parallel" to bjam.
    - icu                      : no [2]
    - iconv (libc)             : no [2]
    - iconv (separate)         : yes [2]
    - cxx11_auto_declarations  : no [2]
    - icu                      : no [3]
    - iconv (libc)             : no [3]
    - iconv (separate)         : yes [3]
    - cxx11_auto_declarations  : no [3]
    - native atomic int32 supported : no [2]
    - native syslog supported  : yes [2]
    - pthread supports robust mutexes : no [2]
    - Boost.Regex is header-only : no [2]
    - cxx11_static_assert      : no [2]
    - cxx11_static_assert      : no [3]
    - has std::atomic_ref      : no [2]
    - has -Wl,--no-undefined   : no [2]
    - has -Wl,-undefined,error : yes [2]
    - has statx                : no [2]
    - has statx syscall        : no [2]
    - cxx11_rvalue_references  : no [2]
    - has std::atomic_ref      : no [3]
    - has -Wl,--no-undefined   : no [3]
    - has -Wl,-undefined,error : yes [3]
    - has statx                : no [3]
    - has statx syscall        : no [3]
    - cxx11_rvalue_references  : no [3]
    - has_icu builds           : no [2]
    - lockfree boost::atomic_flag : no [2]
    - native atomic int32 supported : no [3]
    - native syslog supported  : yes [3]
    - pthread supports robust mutexes : no [3]
    - cxx11_lambdas            : no [2]
    - cxx11_lambdas            : no [3]
    - std_wstreambuf builds    : no [2]
    - std_wstreambuf           : no [2]
    - std_wstreambuf           : no [3]
    - BOOST_COMP_GNUC >= 4.3.0 : no [2]
    - BOOST_COMP_GNUC >= 4.3.0 : no [4]
error: Unable to find file or target named
error:     'libs/thread/build//boost_MYextralLabel_thread'
error: referred to from project at
error:     '.'
make: *** [build] Error 1

I’m sure I’m doing something wrong, but after more than 12 hours of working on this I’ve run out of ideas and started to suspect that bcp is broken.

Any ideas?

Filed under: Kiến thức lập trình - @ 11:08

Thẻ: boostbcpboost-build

Thiết kế website giá rẻ

Danh mục

“error: Unable to find file or target named” when using BCP to change Boost namespace

“error: Unable to find file or target named” when using BCP to change Boost namespace

“error: Unable to find file or target named” when using BCP to change Boost namespace